home *** CD-ROM | disk | FTP | other *** search
/ Windows Expert / Windows Expert.iso / drivers / win31acc.zip / WIN31ACC.ZIP / README.TXT < prev    next >
Text File  |  1992-04-24  |  4KB  |  110 lines

  1. ATI Windows 3.1 Display Driver Disk (Accelerator):
  2. =================================================
  3.  
  4. April 22, 1992 release for:
  5.  
  6.    ATI 8514 ULTRA
  7.    ATI Graphics ULTRA
  8.    ATI Graphics VANTAGE
  9.  
  10. Copyright (c) 1992, ATI Technologies Inc.
  11. All Rights Reserved
  12.  
  13. ATI  Technologies Inc.    reserves all rights with respect to the programs
  14. and drivers supplied.
  15.  
  16.  
  17. DISCLAIMER OF WARRANTY:
  18. ======================
  19.  
  20. This software is provided without charge.  This software is provided "as
  21. is".   ATI  makes  no  warranties  of  merchantability  or fitness for a
  22. particular purpose,  either expressed or implied.  ATI (where allowed by
  23. state,     federal,   or    provincial  law)  assumes  no liability,  either
  24. incidental or consequential arising from use of this product.
  25.  
  26. ------------------------------------------------------------------------
  27.  
  28. REQUIREMENTS:
  29. ============
  30.  
  31. These  drivers  will  work  with  either  512K  or 1Mbyte of accelerator
  32. memory.  With 512K,  16 colors will be displayed.  On 1Mbyte boards, 256
  33. colors are displayed.
  34.  
  35. For 800x600 operation, the  Graphics  ULTRA/VANTAGE  ROM version must be
  36. 1130111513 (v1.3) or newer.  For  8514  ULTRA  ROMs, the version must be
  37. 1330111330 (v1.3) or newer. Please contact ATI Customer  Support for ROM
  38. upgrade details. The ROM  version  label  is  displayed  in  the startup
  39. banner on system startup.
  40.  
  41. These  drivers  will  work  with  either  512K  or 1Mbyte of accelerator
  42. memory.  With 512K,  16 colors will be displayed.  On 1Mbyte boards, 256
  43. colors are displayed.
  44.  
  45. ------------------------------------------------------------------------
  46.  
  47. INSTALLATION:
  48. ============
  49.  
  50. Before proceeding through  the  installation steps, configure Windows 3.1
  51. to use the Microsoft 8514/a driver.
  52.  
  53. 1)  Exit Windows (not a DOS box).
  54.  
  55. 2)  Change to your Windows directory (CD).
  56.  
  57. 3)  Place the ATI Windows 3.1 Display Driver Disk into drive A:. Drive B:
  58.     may be used but is not recommended. The Windows 3.1 Setup program may
  59.     behave inconsistently when using drive B:.
  60.  
  61. 4)  Type "SETUP" at the DOS prompt.
  62.  
  63. 5)  Select Display - "Other (Requires disk provided by a hardware manufact.."
  64.  
  65. 6)  Select the desired screen resolution and press Enter. Setup will copy
  66.     files from the diskette into your Windows directories.
  67.  
  68.     Setup may ask if you  wish  to  KEEP or REPLACE the specified driver.
  69.     Choose REPLACE by pressing ESC. This  choice  will appear if you have
  70.     installed an older ATI driver  with  the  same  file name previously.
  71.     If you are  presented  with  this  choice  AFTER this installation is
  72.     completed  (by  choosing  a  different  ATI  driver selection later),
  73.     choose KEEP by pressing ENTER.
  74.  
  75.     Setup may ask for some  Windows  diskettes.  In  this case, enter the
  76.     drive that contains the ATI driver disk  (i.e. A:) so Setup continues
  77.     to use this disk.
  78.  
  79.     An error message may appear  indicating  that there is a problem with
  80.     drive A: during the file  copying  process  (such as VGALOGO.LGO). If
  81.     this occurs, press ESC  twice  (after  each error box appearance) and
  82.     enter the drive  that  contains  the  ATI  driver  disk when asked by
  83.     Setup.
  84.  
  85. 7)  When  Setup  is  complete,  type  "WIN" at the MS-DOS prompt to start
  86.     Windows 3.1.
  87.  
  88. ------------------------------------------------------------------------
  89.  
  90. Notes - Accelerator based drivers:
  91. =================================
  92.  
  93. The  following  features  are  missing  from the current ATI Accelerator
  94. drivers disk. These drivers will be provided in a later release.
  95.  
  96. . Crystal Font drivers
  97.  
  98. ------------------------------------------------------------------------
  99.  
  100. ATI Customer Support:
  101. ====================
  102.  
  103. ATI Customer Support is available Monday through Friday, 9:00am to 5:30pm
  104. EST.
  105.  
  106.    Phone: (416) 756-0711
  107.    FAX:   (416) 756-0720
  108.    BBS:   (416) 756-4591  (upto 9600 baud, 8 bits, no parity, 1 stop bit)
  109.  
  110.